Vu Jàdé Audio an experience never heard before Tube Preamplifier: - final production design has been finalized. Unit production to begin mid-2019. Contact us for details. Our Preamplifier was developed through many years of trial, testing, l
  • Home
  • About Us
  • Digital Audio Converter
  • Hybrid Amplifier
  • Mono Block Amplifier
  • Phono Stage
  • DHT Preamplifier
  • Contact Us
  • Product Pricing
  • Mods and Repairs
  • Product Warranty
  • Specifications
  • Audio Policies
  • Capital AudioFest 2017
  • Gallery
​​Vu Jàdé Audio
an experience never heard before
​


​101D Direct Heated Triode Tube DAC Specifications:
 
Digital Section:
DAC section: Utilizing R-2R discrete resistors digital to analog converting topology
Clock Jitter RMS: 0.8ps typical
Jitter Reduction: FIFO Buffer and reClock with low jitter clock
Input SPDIF (RCA/XLR): Up to 24 bit/ 192 Khz
Input I2S PCM (HDMI): Up to 24 bit/ 384 Khz
Input I2s DSD (HDMI): Up to DoP128 and DSD256
Frequency Range: 20 hz to 20 Khz

Analog Section:

Frequency Range: 20 hz to 20 Khz
Tubes: 101D Direct Heated Tubes for output stage.  5AR4/GZ34, 6C45pi, 101D, OC2 tubes for high voltage regulator
Tube Buffer: Full Music or Psvane 101D Direct Heated Tubes with point-to-point direct wiring, utilizing transformer coupling between digital and analog sections to isolate digital noise.
Analog Power Supply: LC (double chokes and Clarity Polypropylene TC 600 capacitors) filtering with direct heated tube for high voltage regulation in shunt regulator configuration.
The DAC section and power supply section are in separate chassis.
 
Tube Compliment:
(2) – 101D tubes
​(1) - 226 tube
(1) - GZ34/5AR4 rectifier tube
(1) – 6C45 Pi tube
(1) - OA2 tube
  
Power Section
Power Input: 110V/220V 50/60 hz (factory pre-configured)
Output Capacitors:  OIMP Oil Impregnated Metalized Polypropylene Audio V-Capacitors

 
NOTE:  These specifications are subject to change at any time.

Additional Information:
Nichicon Capacitors
Shinkoh & Mills resistors
Sowter interface transformers
Circuit break on/off switching
Each unit is point-to-point wired
All Teflon tubes sockets with gold pin contacts
Digital volume control for signal level matching
RCA S/PDIF input up to 192/24
DHT triodes in single ended configuration
Power supply with tube rectification GZ34/5AR4
Power supply with tube regulation 101D in shunt regulation mode
115 V or 230 V or dual voltage
Only one amplification stages in the DAC
Only one capacitor per channel
 
Dimensions:
Each chassis 9" W, 6.5" H, 12.8" D. Total weight (shipping) 20 kg, net 16 kg, 45 lbs
 
Available Upgrades/Options:
Custom wound nickel chokes
CuTF Copper Foil & Fluoropolymer Film Audio V-Capacitors
Custom wound toroidal transformers
Western Electric Replica 101D / Metal base Psvane
HDMI input
Balance input
Balanced version also available
Toslink optic


​

​Vu Jade Audio

16 Glen Terrace         Montville         New Jersey       07045   USA

(973) 487-6619   email: [email protected]
 
 

Powered by Create your own unique website with customizable templates.
  • Home
  • About Us
  • Digital Audio Converter
  • Hybrid Amplifier
  • Mono Block Amplifier
  • Phono Stage
  • DHT Preamplifier
  • Contact Us
  • Product Pricing
  • Mods and Repairs
  • Product Warranty
  • Specifications
  • Audio Policies
  • Capital AudioFest 2017
  • Gallery